NA Rebuild - DIY Brake Duct 2

Brake Ducting completed with 76mm/3" silicon hoses with inlet air duct installed under the water radiator

NA Rebuild - DIY Brake Duct

I haven't found on the net other guide to do a cheap brake duct intake for cold air... So i've tryed to do my home made version with some diy...

No project, behind this job, i've improvised all. For this reason, the cutting of the 2 hubs i've made, are different. While i was cutting the left one, i've noticed that a different kind of cut, may have improved the solidity of the duct/dust cover, so the cuttng of the right one is better.

Final Result

Left Hub

Right Hub, different cutting and more stable

Different cutting for left and right one

NA Rebuild - Rust, Sanding, Painting!

Caliper Bracket need a sandblasting

Front Piston Caliper after 20years of dirt

Shot peening process, is aggressive on thin surfaces like this metal ring

Let's paint the calipers with high temp paint!

All 4 Calipers Painted

Lower Rear Bolt after 20yr and after a wire brushing

Lower Ball Joint bolt rusted and seized in. Cutting is the only solution 

All Suspension arms shot peened

Fortunately, no metal balls under the ball joint boot

Suspension Arms after 1st primer layer

Suspension Arms after 1st primer layer

NA Rebuild - Rear Caliper disassembling

MX5 NC with Brembo F50 and Advan RS 18''

From Thailand (i think...) an amazing NC with Front and Rear Big Brembo kit and a set of 18'' Advan RS.
If you have more than 200hp, this big brake kit is for you, but our stock brakes remains good brakes for slightly upgraded NC. I'm not a fan of 18 inches wheels on NC, but this setup really astonish me O_O.

View the full thread HERE.